Sony VAIO PCV-W Series Service Manual page 21

DISASSEMBLY DISASSEMBLY
17 17 5 5
To Flowchart To Flowchart
TOP TOP FOR SAFETY FOR SAFETY
Attach the two UL tapes ( 8
Attach the two UL tapes (
to secure the harness and to secure the harness and
the flexible flat cable (LED) the flexible flat cable (LED)
as shown in the right picture. as shown in the right picture.
Inverter Inverter
shield (W700M) shield (W700M)
CNX-217 CNX-217
board board
2 2
8 8
5 5
6 6
Inverter unit Inverter unit
DISASSEMBLY DISASSEMBLY
FRAMEHARNESS FRAMEHARNESS
qj qj
CNX-217 BOARD, INVERTER UNIT CNX-217 BOARD, INVERTER UNIT
8 ) )
UL tape UL tape
Coating clip Coating clip
4 4
4 4
2 2
7 7
6 6
PARTS LIST PARTS LIST
EXPLODED VIEW EXPLODED VIEW
Removal procedure Removal procedure
1 Open wide the Coating clip, 1
Open wide the Coating clip,
and disconnect the harness. and disconnect the harness.
2 2 Disconnect the three
Disconnect the three
connectors. connectors.
3 3 Disconnect the harness.
Disconnect the harness.
4 Remove the two screws, 4
Remove the two screws,
and remove and remove
1 1
the CNX-217 the CNX-217
board. board. +PS (3 X 6) +PS (3 X 6)
7-682-647-01 7-682-647-01
Gold Gold
5 5 Remove the two screws,
Remove the two screws,
and remove and remove
the Inverter the Inverter
shield. shield. +PS (3 X 6) +PS (3 X 6)
7-682-647-01 7-682-647-01
Gold Gold
6 6 Disconnect the four
Disconnect the four
connectors. connectors.
7 Remove the two screws, 7
Remove the two screws,
and remove and remove
the inverter the inverter
3 3
unit. unit. +PS (3 X 6) +PS (3 X 6)
7-682-647-01 7-682-647-01
Gold Gold
8 8 Peel off the two UL tapes.
Peel off the two UL tapes.