Sony VAIO PCV-W Series Service Manual page 16

DISASSEMBLY DISASSEMBLY
12 12
To Flowchart To Flowchart
A A
1 1
TOP TOP FOR SAFETY FOR SAFETY
T T o replace the CPU o replace the CPU or heat sink (in
is equipped with heat sink), install new CPU or is equipped with heat sink), install new CPU or
heat sink after thermal dissipation grease is wiped heat sink after thermal dissipation grease is wiped
2 2
off and apply the grease to the position shown off and apply the grease to the position shown
in the figure. in the figure.
Thermal dissipation greas Thermal dis
CPU CPU
Amount of application: 0.5 g (equivalent to twice Amount of application:
T T ake care not to ake care not to apply the grease to
∗ ∗
places because it has high conductivity places because it has high
DISASSEMBLY DISASSEMBLY
FRAMEHARNESS FRAMEHARNESS
or heat sink (in case that CPU case that CPU
sipation grease: e: Silicon co Silicon compound mpound
(G-765) 90G (G-765) 90G
0.5 g (equivalent to twice
the size a wooden safety the size a wooden safety
match head) match head)
apply the grease to any other any other
conductivity. .
Grease Grease
(on the entire surface (on the entire surface
of heat splitter) of heat splitter)
PARTS LIST PARTS LIST
EXPLODED VIEW EXPLODED VIEW
qs qs
CPU CPU
Removal procedure Removal procedure
1 1 Raise the lever in the
Raise the lever in the
direction of the arrow A A . .
direction of the arrow
2 2 Pull the CPU straight up
Pull the CPU straight up
and remove it. and remove it.