Device Label - Valley Electronics lady-comp Instructions For Use Manual

30

Device label

Service and help
In case of unforeseen events and problems during use, the manufacturer can
be contacted at any time. A defective sensor can be re-ordered through the
distributor in your country. If you have any questions about your cycle, please
contact the distributor in your country. You can find all distribution partners
on lady-comp.com
Valley Electronics AG
CH-8041
IP22
2x AAA
1,2 V – 1,5 V
yyyy-mm
The following figure shows the device
label that is attached to the back of
your Lady-Comp.