Kohler 14RCA Installation Manual page 34

Generator Set
Notes:
See Figure 3-3 for terminal block location on generator
set. Check the decal on the generator set for terminal
block connections.
See Section 3.3.1, Cable Specifications.
See Figure 3-9 for communication connection detail (A
and B, PWR and COM).
ground at the generator set.
Use splices or wire nuts to collect multiple leads for
connection to the generator set terminal block. See
Figure 3-12.
Figure 3-13 Accessory Module Connections (two cable runs with one and two modules shown)
34 Section 3 Electrical
Terminal
Block
Connect the cable shield to
RXT ATS
PIM
Load
Shed
Kit
tp6809
TP-7091 2/21