Casio DQ-542 Operation Manual

MA0508-EB
ILLUSTRATION
• A sticker is affixed to the glass of the clock when you purchase it. Be sure to remove the sticker before using the
clock.
• Depending on the clock model, its configuration may differ somewhat from that shown in the illustration.
Alarm Off
PM indicator Alarm time
Current time Date
(Hour, minutes) (month – day)
GENERAL GUIDE
1 1 1 1 1 SNOOZE/LIGHT button
• Press this button to illuminate the display for about three seconds.
• Pressing this button while the alarm is sounding stops the alarm.
2 2 2 2 2 12 • 24/YEAR button
• Press this button to toggle between 12-hour and 24-hour timekeeping.
• Pressing this button while "CALENDAR" is selected by the Mode switch 5 advances the year setting.
Operation Guide DQ-542/542B
Alarm On Snooze Alarm On
Snooze on indicator
Alarm on indicator Alarm on indicator
3 3 3 3 3 MIN/DATE button
• Pressing this button while "TM" is selected by the Mode switch 5 advances the minute setting.
• Pressing this button while "CALENDAR" is selected by the Mode switch 5 advances the day setting.
4 4 4 4 4 HR/MONTH button
• Pressing this button while "TM" is selected by the Mode switch 5 advances the hour setting.
• Pressing this button while "CALENDAR" is selected by the Mode switch 5 advances the month setting.
5 5 5 5 5 Mode switch
NORMAL: For normal use
AL: For adjusting the alarm setting
TM: For adjusting the time setting
CALENDAR: For adjusting the date setting
6 6 6 6 6 Alarm Mode selector
SNZ: Snooze alarm on
ON: Alarm on
OFF: Alarm off
7 7 7 7 7 Battery
SETTING THE CLOCK
1. Slide the Mode switch 5 to "TM". This
Press to advance the
causes the current time to flash on the
hour setting.
display.
2. Use the 12 • 24/YEAR button 2, MIN/
DATE button 3, and HR/MONTH
button 4 to set the time. Holding down
the MIN/DATE button 3 or HR/
MONTH button 4 changes the
corresponding setting at high speed.
• Make sure you set the correct am/pm
PM indicator
time if you are using 12-hour
timekeeping. The PM indicator indicates
PM times, while nothing is indicated for
Hour
AM times.
• The seconds count reverts to 00
automatically whenever you finish
adjusting the minute setting.
3. Slide the Mode switch 5 to
Press to advance the
"CALENDAR". This causes the current
month setting.
date to flash on the display.
4. Use the 12 • 24/YEAR button 2, MIN/
DATE button 3, and HR/MONTH
button 4 to set the date. Holding down
any button advances the corresponding
setting at high speed.
• You can set the year in the range of 2004
to 2039.
Year
Month
5. Slide the Mode switch 5 to "NORMAL". This will cause the figures on the display to
stop flashing.
Press to advance the Press to toggle between
minute setting. 12-hour and 24-hour
timekeeping.
Minutes
Press to advance the Press to advance the
day setting. year setting.
Day
1