Table of Contents
Advertisement
Erasing All Pictures (All-Frame Erase)
1 /3
SELECT
NO
OFF
YES
NO
SET
SELECT
Check the following before
erasing images
Erasure is not possible if the
image to be erased is protected or
a write protect seal is attached to
the card. (
For details on handling your card,
refer to the instructions provided
with it.
To prevent destruction of data on the card, never attempt to open the card cover,
remove the batteries, disconnect the AC adapter or remove the card during
erasure.
VIEWING OR ERASING IMMEDIATELY AFTER SHOOTING
The following operation clears the card of all stored image data.
NO
OFF
NO
NO
SET
OK
OK
NO
NO
SET
OK
Page 51)
Operating Procedure
Check that the camera is set to the
Playback mode by holding down the
monitor button for a moment.
1.
Select
by pressing the
arrow pad key.
2.
Select "YES" by pressing the
arrow pad key, and then press the
OK/menu button.
3.
Select
by pressing the
arrow pad key.
4.
Select "YES" by pressing the
arrow pad key.
5.
Press the
OK/menu button.
[All of the image frame data saved in the
card will be erased.
To cancel erasure:
Select "NO" and press the
OK/menu button.
Erasure time may be prolonged if
the card has been subjected to
print reservation by DPOF (
Page 74). This is not a malfunction.
47
or
or
or
or
Hide quick links:
Advertisement
Table of Contents
