Installation Preparation - GE Zoneline AZ9VH Owner's Manual And Installation Instructions

Installation Preparation

TYPE OF ELECTRIC CONNECTIONS
A power supply kit must be used to supply power to
Models must be installed using the appropriate GE
Appliances power supply kit for the branch circuit
amperage and the electrical resistance heater
connection of components is done in accordance with
electrical codes.
External Disconnect
electrical supply located within line of sight of the
disconnecting means shall be readily accessible
disconnect shall not obscure the rating plate or be
located on the access panel or closet door. A properly
rated field supplied switch is a common means for
electrical disconnection.
POWER CONNECTION CHART
Power Supply Kits
230 / 208 Volt
Range: 187v - 254v
Power Supply Kits
265 Volt*
Range: 249v - 293v
Direct Connections
Configuration Heater Wattage
Direct Connection @ 230 / 208 Volt
Hard Wired
Hard Wired
Hard Wired
Configuration Heater Wattage
Direct Connection
Hard Wired
Hard Wired
Hard Wired
Power Supply Kit Direct Connect
208/230/265 Volt Applications
MPORTANT: Connection to a branch circuit MUST
be done by direct connection in accordance with the
building mounted exposed receptacle is not permitted
by code.
@ 265 Volt
Circuit Protective Device
Circuit Protective Device
49-5000640 Rev. 0