Related Manuals for Jobsite CT4284
Summary of Contents for Jobsite CT4284
- Page 1 800W JIG SAW WITH LASER CT4284 ORIGINAL INSTRUCTION Read the operating manual thoroughly before work and keep it for future reference. Cannon Tools Limited Address: 20 Station Road, Rowley Regis, West Midlands, B65 0JU.U.K.
-
Page 3: Ec Declaration Of Conformity
In case of alteration of the machine, not agreed upon by us, this declaration will lose its validity. JIG SAW Product description: Model: CT4284 Applicable EC Directives: EC Machinery Directive 2006/42/EC EC Directive of Electromagnetic Compatibility 2014/30/EU Harmonized standards... - Page 4 WARNING! For your own safety, read this manual and the general safety instructions carefully before using the appliance. Your power tool should only be given to other users together with these instructions. SYMBOLS The following symbols are used in this manual and/or on the machine: WARNING –...
-
Page 5: General Power Tool Safety Warnings
GENERAL POWER TOOL SAFETY WARNINGS WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. - Page 6 the risk of electric shock. 3) Personal safety a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
- Page 7 c) Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool.
- Page 8 • Keep the shoe flat on the work piece. • Do not put pressure on the saw, such that it slows the motor down. Allow the saw blade to cut without pressure. You will get better results and you will the taking better care of your tool. •...
- Page 9 6) Service a) Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. OVERVIEW Trigger switch Base plate Variable speed dial Pendulum adjuster Lock-on button Dust exhaust port Blade guard...
-
Page 10: Technical Data
T ECHNICAL DATA Model No. CT4284 Rated Voltage 220-240V~50Hz Rated power input 800W No load speed 800-3000/min Cutting capacity in wood 100mm Cutting capacity in steel 10mm ± Bevel capacity 45 degree Noise level LpA: 84 dB (A) K= 3dB(A)) -
Page 11: Dust Extraction
• Place the machine on the workpiece with the saw marking above the start of the cutting line. • Check that the laser line aligns with the cutting line as marked on the workpiece. • Switch on the machine. • Follow the “Instruction for use”... -
Page 12: Changing A Blade
CHANGING A BLADE WARNING. Always ensure that the saw is switched off and the plug is removed from the power point before making any adjustments or changing a blade. • Turn the jigsaw upside down • Remove the blade guard •... -
Page 13: Maintenance
MAINTENANCE WARNING. Always ensure that the tool is switched off and the plug is removed from the power point before making any adjustments or maintenance procedures. Keep the tool’s air vents unclogged and clean at all times. Regularly check to see if any dust or foreign matter has entered the grills near the motor and around the trigger switch. -
Page 14: Expanded View
EXPANDED VIEW... -
Page 15: Spare Parts List
SPARE PARTS LIST Name of part Name of part TAPPING SCREW 3.9x45 STATOR RIGHT ENCLOSURE CORD SLEEVE TAPPING SCREW 3.9x19 CABLE AND PLUG BASE PLATE LEFT ENCLOSURE SCREW M4X14 CHANGER-COVER SWITCH FIXING PLATE CONNECTING PLATE PIN 4 DUST WAY WASHER 4 FINGER GUARD ROLLER SUPPORT BACK BEARING... - Page 16 CANNON TOOLS LTD Add: 20 station road, Rowley Regis, west midlands,B65 0JU.U.K. Made in China...