Table of Contents
Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for iRay Technology FINDER II FL35R
Summary of Contents for iRay Technology FINDER II FL35R
- Page 1 FL35R/FH35R FL35R/FH35R FINDER ǁ Thermal Imaging Monocular Operating Manual IRay Technology Co., Ltd. Add: 11th Guiyang Street, YEDA, Yantai 264006, P.R. China Tel: 0086-400-998-3088 www.infirayoutdoor.com Web: www.infirayoutdoor.com Email: infirayoutdoor@infiray.com...
- Page 2 WARNING! CAUTION LASER wavelength: 905nm maximum power: < 1mW Information for the user An additional warning for Class 1M and 2M laser products. This warning shall state that viewing the laser output with telescopic optical instruments (for example, telescopes and binoculars) may pose an eye hazard and thus the user should not direct the beam into an area where such instruments are likely to be used.
-
Page 3: Specification
SPECIFICATION PACKAGE CONTENTS Model FL35R FH35R Finder II Thermal Monocular Microbolometer Portable Bag Resolution, pixels 384 x 288 640 x 512 * Improvements may be made Type C USB cable Pixel size, µm to the design and software of HDMI cable this product to enhance its NETD, mk ≤40... -
Page 4: Battery Pack Installation
Cool hue and warm hue for selection BATTERY AND SAFETY 32GB Build-in memory Support photo and video recording Finder II series is supplied with a quickly removable 18650 Li- Support APP connection via Wi-Fi ion battery pack, which enabled the device to be used for up Built-in digital compass and motion sensor to 5.5h. - Page 5 Method 1: Charging with Type-C Port Method 2: Charging with Battery Charger Align the orange vertical line on the battery pack with the Align the positioning block (A) of the battery pack (8) with white triangle symbol next to the battery compartment on the groove (B) of the battery charger (15), and insert the the Finder II, and install the battery pack into the battery battery pack (8) into the battery charger (15).
-
Page 6: External Power Supply
Battery charge status (see table). It is not recommended to connect third-party devices that consume more power than allowed. LED Indicator Battery charge status Do not disassemble or modify the battery pack without Battery level is from 1% to 25%. professional instructions. -
Page 7: Button Operations
BUTTONOPERATIONS Device status / Button First short press Next short press Long press operation mode The device is off. Power on device Home screen state Standby Wake up the device Power off device Power button Defective pixels calibration Cancel all calibrations of this calibrate a defective pixel Undo the pixel calibration interface... - Page 8 MENU/STATUSBARICONS Factory reset Return to the Main Menu White Hot Single ranging Black Hot Continuous ranging Red Hot Battery indication Target Highlight Battery charging Ironbow Rainbow ×1/×1.5/×2/×2.5/×3/×3.5/×4 Digital zoom OPERATION Display brightness WARNING! The lens of Finder II series must not be pointed at Image sharpness any sources of intense energy, such as laser-emitting devices Automatic calibration...
-
Page 9: Home Screen
Shut Down Lower left corner--Time and date Lower right corner--Video output icon (on). After using the device, press and hold the Power (3) button for 3 seconds. The shutdown countdown screen will appear. When the countdown from 3 to 0 is completed as indicated by the countdown icon, the device is powered off. -
Page 10: Video Recording
M mode (manual). The device needs to be calibrated Video Recording manually. In the home screen, press and hold the Down/Photo (6) Short press the Up (5)+Down (6) button for shutter Ø button to start video recording. calibration, and long press for background calibration. A tooltip showing the recording time (showing in 00:01... - Page 11 Double-click "my computer" on the desktop - double-click In the continuous ranging mode, the distance of the target to open the device named "Infiray" - then click and indicated by the cursor will be refreshed automatically every open the device named "Internal Storage" 1 second, without any keystroke operation.
-
Page 12: Main Menu Functions
Display Brightness- by pressing the Up (5) button to Composition and Description of the Main Menu „ change the display brightness level from 1 to 4 in the Ultraclear - Selection of the Ultraclear mode shortcut menu 2. Press and hold the Menu button (4) to enter the menu. Image Sharpness- by pressing the Down (6) button to „... - Page 13 Digital Compass - Selection of the Digital Compass Length Unit - Selection of the length unit Press and hold the Menu button (4) to enter the menu. There are two units for selection: meter (M) and yard (Y). Select the 'Digital Compass' option. Press and hold the Menu button (4) to enter the menu.
- Page 14 Cold hue mode (C) horizontal to the vertical and vice versa. Image will be more contrast, more hierarchy, and more The icon and text will be changed from white to blue obvious targets. when this direction is activated. Use the Up (5)/Down (6) buttons to move the cursor to Warm hue mode(W) align its centre with the defective pixel.
- Page 15 Factory Reset - Restore Factory Settings Rotate the device at least one 360° in three axial Open the sub menu by pressing the Menu button (4). directions in 25 seconds Select the 'Factory Reset' option according to the direction Enter the 'Factory Reset' sub menu with a short press of shown as the icon to the Menu button (4).
-
Page 16: Pip Function
Wi-Fi FUNCTION PIP FUNCTION The Finder II series is equipped with wireless communication PIP (Picture in Picture) function enables you to view a with external devices (computer, smartphone) via Wi-Fi. magnified digital zoom image in a separate 'window' Press and hold the Menu (4) button to enter the menu. simultaneously with the main image. -
Page 17: Maintenance
App store. Otherwise, you can download the app by MAINTENANCE scanning the QR code. When installation completed, open InfiRay Outdoor Maintenance should be carried out at least twice a year and application. consist of the following actions. If your device is already connected with a mobile device, Wipe the external surfaces of metal and plastic parts free of please switch on the mobile data in mobile device. - Page 18 Malfunction Possible reason Correction Malfunction Possible reason Correction Perform image The device is Image is unclear, calibration outside the area of with vertical lines Relocate the device Calibration required according to Wi-Fi signal non Wi-Fi coverage. and uneven into direct line of Section ‘Calibrationʼ...
-
Page 19: Important Safety Information
Safety Instructions For The Power Supply Unit IMPORTANT SAFETY INFORMATION Check the power supply unit, cable and adapter for visible Environmental Influences damage before use. Do not use any defective parts. Defective components must WARNING! Never point the lens of the device directly at be replaced. - Page 20 User information on the disposal of electrical and Intended Use electronic devices (private households) The device is intended for displaying heat signatures during nature observation, remote hunting observations and for civil The WEEE symbol on products and/or use. This device is not a toy for children. accompanying documents indicates that used electrical and electronic products must not be Use the system only as described in this instruction manual.
-
Page 21: Legal And Regulatory Information
WLAN: 2.412-2.472GHz (For EU) FCC Statement Wireless transmitter module power<20dBm (only for EU) FCC-ID: 2AYGT-26X IRay Technology Co., Ltd. thus declares that the Labeling Requirements Finder II series complies with the directives 2014/53/EU and 2011/65/EU. The full text of the This device complies with part 15 of the FCC Rules. - Page 22 RF exposure requirements and should be avoided. Use only the supplied or an approved antenna. We, IRay Technology Co., Ltd., hereby declare that this product was tested conforming to the applicable FCC rules under the most accurate measurement standards possible,...
Need help?
Do you have a question about the FINDER II FL35R and is the answer not in the manual?
Questions and answers