Nostalgia Electrics Vintage CCP-200 Instructions And Recipes Manual page 8

Assembly of Base Support
1. Push Handle (E) attaches onto the Storage
Compartment (C) using supplied #1 Screws.
2. Insert Cross Bar (K) into the square inserts on the inside of Base Support (I)
and secure from below with #2 Bolts. Insert the Leg Assembly (L) over the
protruding ends of the Base Support (I) and fasten #4 Studs and #6 Nut Cap.
3. Secure Bottom Plate (J) of the Storage Compartment (C) to Base
Support (I) using four #2 Bolts. Open Storage Compartment (C)
door to help support Bottom Plate (J) with your hand.
4. Assemble Base Support (I) into the bottom of the Storage
Compartment (C) and secure with #3 Bolts.
6