Chapter 2 - Installation; Power Supply & Signal Connection; Function Key Control; Osd Lock/ Unlock - DFI IDP101P-MS User Manual And Installation Manual

Chapter 2 - Installation

X Power Supply & Signal connection
Power supply: Use attached Wall-mount Power adaptor to get 12Vdc power.
VGA signal: Use attached 1.8 meter 15pin D-sub VGA cable to connect System PC.
HDMI signal: Apply HDMI signal or use DVI-D to HDMI signal cable for DVI input.
Touch Control: Use attached USB cable to connect system PC.
X Function Key Control
User's Manual | IDP101P-MS
X OSD Lock/ Unlock
Press "Menu" Key for more than 7 seconds shall lock all control keys' function.
After keys locked, press "Menu" key again for more than 7 second shall unlock the key
function.
X Structure of OSD settings
Chapter 2
Installation
5