Chapter 1 - Introduction; Features; Unpack The Monitor; Check Accessory - DFI IDP101P-MS User Manual And Installation Manual

Chapter 1 - Introduction

- This monitor produces clear images with the vivid color at resolutions from VGA up
to WXGA and used with graphics adapter of scanning frequency from 30KHz to 82KHz
in horizontal sweep while vertical refresh rate is 55Hz to 76 Hz continuously.
- On Screen Display provide flexibility with simple & user-friendly controls.
- Integrated D-sub and HDMI inputs provide flexible connectivity for high-definition
multimedia devices and gaming consoles
- USB interface Projected Capacitive Touch Panel
X Features
- 10.1 inch diagonal screen with native display resolution 1280 x 800.
- Dual Video input: VGA, HDMI ( to DVI-D by a HDMI to DVI-D cable)
- Full flat front panel with high quality projected capacitive touch panel.
- Fully Glossy surface throughout monitor's appearance.
- Rimless front bezel design, spill & dust proof.
- Cable management down routing through the mounting stand.
- Light weight.1,270 g physically.
X Unpack the monitor
- Put the monitor on a clean surface; make sure the box in upright position
- Remove packing materials from inside of box.
User's Manual | IDP101P-MS
X Check accessory
Please make sure the entire accessory is included:
1.8 meter HDMI cable
Chapter 1
INTRODUCTION
1.8 meter Touch USB cable
AC-DC power adaptor : 100Vac~240Vac
Adaptor : 2.1Ø, 12Vdc 18W
( USA/UK/EU Option)
4