For Main Board; Phone Jack Connector Cn601; Hdmi Connector Cn501 - HP S430c Maintenance And Service Manual

For Main Board

Phone Jack connector CN601

Repair the Phone Jack connector:
1) Use a soldering iron and a de-soldering pump to remove as much solder as possible from the pin.
2) Lift the Phone Jack connector from the circuit board.
3) Place the new component on the circuit board. Be sure that it matches the circuit board footprint.
4) Solder the new component.

HDMI connector CN501

Repair the HDMI connector:
1) Use a soldering iron and a de-soldering pump to remove as much solder as possible from the pin.
2) Use a hot air gun to melt the solder on the pins.
19