Download Print this page

Signode PSD-109 Quick Start Manual

Hide thumbs Also See for PSD-109:

Download this manual

ENGINEERED PRODUCTS TECHNICAL INFORMATION RELEASE

(POWER STRAPPING MACHINE DIVISION)

This Technical Information Release concerns a field repair program that involves the addition of a

guard and safety labelling onto the PSD 109 and 119 strapping dispensers.

DATE: May 1, 2015

PRODUCT: Models PSD-109 and PSD-119 Strapping Dispensers.

PSD-109

DOES NOT INCLUDE the PSD-119 J and SJ Jumbo Coil Dispensers.

MANUFACTURERS: Signode, Signode Canada, Acme Packaging, Fleetwood and Cyklop.

TECHNICAL ISSUE ADDRESSED

There is a possible crush point on both the PSD-109 and PSD-119 strapping dispensers where the

dancer arm comes into close proximity to the dispenser's "positive stop" area. A guard has been

designed to cover the possible crush point.

RECOMMENDED SOLUTION: Add Internal Warning Sign 611298, Dispenser Guard 611299 and

External Warning Sign 510486.

INTERNAL

WARNING SIGN

MOUNTED TO POST

Part Number:

611298

TIR: 2015-409

PSD-119

DISPENSER GUARD

Part Number: 611299

Dispenser guard fits

both left hand & right

hand dispensers.

EXTERNAL

WARNING SIGN

MOUNTED ON GUARD

Part Number:

510486

Page 1

Page 1 MANUFACTURERS: Signode, Signode Canada, Acme Packaging, Fleetwood and Cyklop. TECHNICAL ISSUE ADDRESSED There is a possible crush point on both the PSD-109 and PSD-119 strapping dispensers where the dancer arm comes into close proximity to the dispenser’s “positive stop” area. A guard has been designed to cover the possible crush point.
Page 2 (POWER STRAPPING MACHINE DIVISION) DISPENSER GUARD INSTALLATION (ESTIMATED INSTALLATION TIME - 15 MINUTES) PSD-109 & PSD-119 DISPENSERS: 1. Before installing the guard, follow your plant's lockout/tagout procedures for securing and isolating all power sources to the dispenser. 2. Attach internal warning sign as shown on guard side of post. Subsequently, the guard will cover sign.
Page 3 (POWER STRAPPING MACHINE DIVISION) DISPENSER GUARD INSTALLATION (ESTIMATED INSTALLATION TIME - 15 MINUTES) PSD-109 & PSD-119 DISPENSERS (Continued): 5. Attach external warning sign as shown. 6. Confirm that equipment is "all clear" and then reconnect power in accordance with the plant's lockout/tagout procedures.

Psd-119