Advertisement
Operation panel (FR-DU08)
5.1.2
Basic operation (factory setting)
Operation mode switchover/Frequency setting
External operation mode
Output frequency monitor (At power-ON)
∗5
Hold down
For the details of operation modes, refer to the FR-A800 Instruction Manual (Detailed).
The monitor items can be changed. (Refer to the FR-A800 Instruction Manual (Detailed).)
For the details of the trace function, refer to the FR-A800 Instruction Manual (Detailed).
For the details of fault history, refer to the FR-A800 Instruction Manual (Detailed).
The USB memory mode will appear if a USB memory device is connected. Refer to the FR-A800 Instruction Manual (Detailed) for the details of the USB memory mode.
16
BASIC OPERATION
∗1(
At power-ON)
Value change
∗2
Parameter clear
Group parameter setting
(For manufacturer setting)
(Example)
Fault record 1
The last eight fault records can be displayed.
(On the display of the last fault record (fault record 1), a decimal point LED is ON.)
When the fault history is empty,
PU operation mode
∗1
∗2
Output current monitor
Value change
All parameter clear
Fault history clear
(For manufacturer setting)
Trace function
∗3
(Example)
Blinking
∗4
Fault record 2
PU Jog operation mode
Blink
(Example)
Frequency setting written and complete!!
Output voltage monitor
The present setting
displayed.
Blink
(Example)
Parameter write complete!!
Parameter copy
Initial value change list
(Example)
Blinking
Blinking
∗4
Fault record 8
is displayed.
∗1
∗2
∗4
Advertisement
