Stihl FS 120 Instruction Manual page 14

English
8
7
A
► Fasten the handlebar (1) at a distance (A) of
approx. 40 cm (15 in) ahead of the engine
housing on the shaft (2)
► Position the clamp (3) and handle support (4)
on the sleeve (5) on the drive tube (2)
6
1
► Place handlebar (1) in the handlebar support
so that the distance (B) is not more than
15 cm (6 in) – the rubber handle (6) must be
14
6
1
4
5
2
3
B
on the left (viewing direction from engine to
handlebar)
► Place the clamp (7) on the handlebar support
► Insert the screws (8) through the holes in the
parts and screw them into the clamp (3) as far
as they will go
► Align the handlebar
► Tighten the screws
5.2 Mounting the Control Handle
3
1
2
► Unscrew the screw (1) – the nut (2) remains in
the control handle (3)
► Push the control handle with the throttle trig‐
ger (4) facing toward the gearbox onto the end
of the handlebar (5) until the holes (6) align
► Insert and tighten screw (1)
5 Mounting the Bike Handle
4
6
5
6
0458-250-0121-F