Advertisement
Peel off the protective sheet from
the adhesive side of the pad (see
step 2A), and press the pad against
the dashboard so that it stays firmly
in place. When you peel off the
protective sheet from the pad, do
not touch the adhesive side.
Press the suction cup of the
mounting device against the pad
(2B).
Turn the catch on the mounting
device to the desired position (2C).
Rotate the ring on the mounting
device clockwise (2D) to create a
vacuum between the suction cup
and the pad.
Place or remove the mobile device
Do not place or remove a mobile
device while driving.
Copyright © 2009-2010 Nokia. All rights reserved.
To detach the suction cup from the
pad, proceed in the same way as
when you detach the cup from a
windscreen (10, 11, and 12).
Attach the holder to the
mounting device
To attach the mobile holder to the
mounting device, insert the catch
on the mounting device into the slot
at the back of the holder (2E).
Rotate the holder clockwise about
90 degrees until it locks into place
(2F). Ensure that the mounting
device is firmly attached (2G).
To detach the holder from the
mounting device, rotate it
anticlockwise.
To place your device into the holder,
slide the device into the holder from
the top while you push the latch
7
Advertisement
