Varytec Hero Spot 90 User Manual page 40

Operating
System information
Hero Spot 90 Hero Spot 90 WH
40
moving head
Parameter Function
'Focus' Sets the default setting of the light bundling.
'Prism' Adjusts the prism.
When the display shows the desired parameter confirm the setting with [ENTER]. Use [UP] or
[DOWN] to select the desired value for the selected parameter (0 ... 120) and confirm the set‐
ting with [ENTER]. To exit the menu item without making changes, press [MENU].
Use the 'System Info' menu to call up information about the system.
Press [ENTER] to activate the main menu and use [UP] or [DOWN] until the display shows
'System Info' . Confirm the selection with [ENTER].
The display shows the current software version, the current operating mode and the DMX start
address.