Varytec Hero Spot 90 User Manual page 35

Operating mode Use the 'Running Mode' menu to set the operating mode.
Press [ENTER] to activate the main menu and use [UP] or [DOWN] until the display shows
'Running Mode' . Confirm the selection with [ENTER] and use [UP] or [DOWN] to select one of
the four operating modes ( 'DMX' , 'Auto' , 'Sound' , 'Slave' ).
Operating mode Function
'DMX' DMX control
In this mode the device is controlled via a DMX controller.
'Auto' Auto programmes
In this mode, the unit plays the preprogrammed shows.
'Sound' Sound control
In this mode, the unit follows the rhythm of the background music or
sounds detected by the built-in microphone.
'Slave'
Slave function
In this mode, the device follows exactly the operation of the master
that it is connected to.
Operating
Hero Spot 90 Hero Spot 90 WH
moving head
35