Toshiba TW-BL80S2 Series Owner's Manual page 30

OPERATIONS
Spin Speed
Spin
When needed, the spinning speed can be adjusted pressing the Speed button in the
following steps: 1200：0-400-600-800-1000-1200
DELAY END
Set the Delay function:
1. Select a programme
2.Press the Delay End button to choose the time(the delaying end time is 1-24 H.)
3.Press [Start/Pause] to commence the delay operation
On/Off Choose the Programme
Cancel the Delay function:
[
Press the DELAY END
before starting the programme. If the programme already started, should press the
[On/Off]
button to reset the programme.
Caution!
•
If there is any break in the power supply while the machine is operating, a special
memory stores the selected programme and when the power is restarted, press the
[Start/Pause]button the program will continue(some machines you can directly
run the previous program without pressing [Start/Pause] button ).
MEMORY
Memorizes the frequently used program.
Select program and options and Press [TEMP.] and [SPIN] 3 sec. to memorize the
selected settings.The default is ECO 40-60.
CHILD LOCK
To avoid mis operation by children.
ON/OFF
Caution!
• Press the two buttons 3 sec. to cancel the function.
• The "CHILD LOCK" will lock all buttons except ON/OFF .
• Cut off the power supply , the kid's protection is to be released.
]/[ ]
DELAY button until the display be 0H.It should be pressed
START/PAUSE
Delay
End
Setting time
SPIN DELAY END
[
Press SPIN] and [DELAY END]
3 sec. till buzzer beep.
[
29
Start
]