GP 23
2019
conforme aux exigences de sécurité
tranche d'age 1 <=> 12 age range
Govaerts Recycling NV
Kolmenstraat 1324
3570 Alken
Belgium
Only for use with standard sized parasols with
!
round pole, diameter 45 to 48 mm. Parasol poles
with smaller diameter can slip through the ope-
nings of the parasol table or can pose a risk of
finger entrapment between pole and opening)
!
Do not use parasols in case of strong winds.
Mounting
The equipment is delivered fully assembled and requires no
extra mounting.
Material
• Solid brown posts made of recycled plastics (PE) coloured
throughout (diameter 8 cm)
• Stainless steel screws 6 and 8 mm
• Yellow plastic sheet (PE) 12.5 mm thickness
Maintenance
The table contains no moving parts. The plastic material
requires very little maintenance, that is cleaning with soapy
water and a sponge or soft brush and rinsing with water to
remove dirt and soap. As the materials' water absorption is
less than 0.29%, it will not get stained by oil, grease or other
products. Moss and algae will not adhere easily and can
easily be removed. Cleaning with high-pressure (max. 100
bar) is possible but not recommended and mostly even not
necessary. Spray with a fan-shaped jet with minimum 30 cm
distance from the surface. Painting or staining is useless as
the material does not need extra protection and moreover
the paint will not stick to the plastic.
Govaerts Recycling NV | Kolmenstraat 1324 | B-3570 Alken | info@govaplast.com | www.govaplast.com
User manual art. GP23
"Parasol table Sandy"
(version 2019-10-08)
Latest version is located at www.govaplast.com
This item is TÜV certified.
Use
Test the parasol pole before using it. If the diameter is too
small, the parasol risks to fall over. Do not use parasols in
case of strong winds, not even when the parasol base is well
anchored.
Inspection Requirements
Visual inspection:
Weekly or monthly, depending on the intensity of use.
Functional:
Monthly or four-monthly, depending on the intensity of use.
Detailed inspection:
Yearly
Special attention during functional or detailed
inspection:
• Check all parts are tight.
• Check worn, loose, damaged, missing parts.
• Check screws sticking out.
• Check anchoring.
• Vandalism?
Use original Govaplast parts when repairing is required, to
ensure the TÜV certificate remains valid.
table top 0 60 cm
hole in table top 0 49cm
+/- 21 kg
1
Need help?
Do you have a question about the Sandy and is the answer not in the manual?
Questions and answers