8-13-5-4
Delete all existing analysis objects as follows:
1.
2.
8-14 Temperature Alarms
8-14-1 Enable an Alarm
By default the temperature alarms are disabled. The user may enable both high
and low temperature alarms simultaneously.
Enable an alarm as follows:
1.
2.
3.
4.
5.
6.
40
PIVOT-IR USER MANUAL
Delete ALL Analysis Objects
Using the touchscreen, tap the Analysis Object icon from the main menu. A
rotary menu appears.
Tap the disable analysis objects icon. The analysis objects disappear and
the rotary dial automatically closes.
Using the touchscreen, tap the Settings icon to open the settings menu.
Tap Temperature Alarm. A submenu opens.
Toggle the preferred temperature alarm setting to the On position by
tapping the switch. Disable the function by tapping the switch again. Blue
means active; gray means inactive.
Tap Save to save settings.
Tap < to exit the submenu.
Tap < to exit the Settings Menu.
5.
4.
3.