Advertisement
Quick Links
Advertisement
Related Manuals for ICI SOUND DETECT
Summary of Contents for ICI SOUND DETECT
- Page 1 Edit Text Industry SOUND DETECT & SOUND DETECT PRO QUICK START GUIDE ICI cameras fall under US Federal Law and Export Control. 2105 W. Cardinal Dr. Beaumont, TX 77705 Phone: (409) 861-0788 Toll Free: (866) 861-0788 infraredcameras.com support@infraredcameras.com We Are IR ™...
- Page 2 IN NO EVENT SHALL ICI BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING, WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF ICI HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
-
Page 3: Package Includes
Package Includes Sound Detect Device Memory Card Charger Type-C Cable Hand Straps Neck Strap Optional: Power Bank ENSURE ALL SYSTEM EQUIPMENT AND COMPONENT ITEMS ARE PRESENT BEFORE CONTINUING. - Page 4 ¼”- 20 mount located on the bottom of the acoustic device. The Sound Detect is used as a handheld acoustic device. MAKE SURE TRIPODS DO NOT BLOCK THE DIRECT PATH OF PERSON(S) TO BE IMAGED TO ENSURE THE EQUIPMENT WILL NOT BE MOVED OR KNOCKED DOWN.
- Page 5 TURN ON THE CAMERA BY PRESSING AND HOLDING THE POWER TURN ON THE CAMERA BY PRESSING AND HOLDING THE POWER BUTTON FOR AT LEAST TWO SECONDS. BUTTON FOR AT LEAST TWO SECONDS. Power on device. Power on device. PRESS AND HOLD THE POWER BUTTON FOR MORE THAN 5 PRESS AND HOLD THE POWER BUTTON FOR MORE THAN 5 SECONDS TO SHUT DOWN THE CAMERA.
- Page 6 Charging via Power Adapter Plug one end of the Type-C Plug the other end of the Type-C cable into the power adapter. cable into the acoustic device. Plug power adapter into a 110/120V electrical outlet.
- Page 7 IT TAKES 4-6 HOURS TO CHARGE AN EMPTY BATTERY TO FULL. THE STATUS LED POWERS ON WHEN THE BATTERY IS BEING CHARGED. THE STATUS LED TURNS OFF WHEN CHARGING IS COMPLETE. THE DEVICE IS NOT MEANT TO BE USED WHILE CHARGING. KEEP THE DEVICE POWER OFF WHEN CHARGING.
- Page 8 Charging via Power Bank Plug one end of the Type-C Plug the other end of the cable into the power bank. Type-C cable into the device. IT TAKES 4-6 HOURS TO CHARGE AN EMPTY BATTERY TO FULL. THE STATUS LED POWERS ON WHEN THE BATTERY IS BEING CHARGED.
-
Page 9: Charging The Power Bank
Charging the Power Bank Plug the other end of the Type-C Plug one end of the Type-C cable into the power bank. cable into the power adapter. Plug power adapter into a 110/120V electrical outlet. - Page 10 IT TAKES 4-6 HOURS TO CHARGE AN EMPTY POWER BANK TO FULL. THE STATUS LED POWERS ON WHEN THE POWER BANK IS BEING CHARGED. THE STATUS LED TURNS OFF WHEN CHARGING IS COMPLETE. THE POWER BANK IS NOT MEANT TO BE USED WHILE CHARGING. KEEP THE POWER BANK DISCONNECTED FROM THE ACOUSTIC DEVICE WHEN CHARGING.
- Page 11 Memory Align the USB drive and insert it into the side of the acoustic device. DO NOT FORCE THE USB DRIVE INTO THE SLOT. THE SIDE OF THE CARD WITH CONTACT PINS MUST BE INSERTED FIRST. IF THERE IS RESISTANCE FLIP THE CARD AROUND AND TRY AGAIN. TO EJECT THE MEMORY POWER OFF THE ACOUSTIC DEVICE;...
-
Page 12: Attach The Neck Strap
Attach the Neck Strap Ensure the strap feeds from the outside- in and through the tether points. Feed the end of the strap through the retainer piece and up the back of the plastic fastener on the acoustic device. Feed the strap from the inside-out and through the tether points. - Page 13 Attach the Hand Straps Feed one end of the strap from the Feed the other end of the strap outside-in and through the tether point. from the outside-in and through the plastic fastener. Fold the straps into the strap cushion. Close the strap cushion.
- Page 14 Website: www.infraredcameras.com You may reach a representative by phone or email Mon – Fri 8:00AM - 5:00PM CST. ICI manufactures complete systems and software. We can provide complete engineering, software, and OEM solutions. Our Fortune 500 clients rely on us for infrared equipment and thermography training (which we offer through the Infrared Training Institute).
Need help?
Do you have a question about the SOUND DETECT and is the answer not in the manual?
Questions and answers