Biogents BG-GAT 2 Instruction Manual page 33

F8
6. Now, insert the black funnel into the chamber [F7].
7. Finally pull off the plastic covering from both sides of the
sticky card [F8].
8. Insert the card through the black funnel [F9].
9. Curl the card slightly holding it at the non-sticky part and
place it into the slit in the black funnel until it touches
the net [F10]. It is loosely held by the slit and has leeway.
The slit and the net at the bottom keep it in place.
F7
10. The bigger part of the sticky card should protrude into
the inner part of the chamber [F11].
11. The trap is now ready for use [F11].
F9
F10
Info:
The mosquitoes will stick to the dry adhesive on the
card when flying around in the translucent chamber.
F11
EN 33