Table of Contents
Advertisement
3
With the ejector being open, firmly hold the
Switch Module and slowly pull out from the
Blade Enclosure.
IMPORTANT:
・
・
NOTE: For the information how to install the Slot Cover, see the Blade
Enclosure User's Guide.
Install the Switch Module in the Blade Enclosure after the period of 30
seconds or longer has passed from removing it from the powered
Blade Enclosure.
If the Blade Enclosure is used with the Switch Module being
removed, install the Slot Cover to the empty slot and secure it with a
screw.
(English)
33
Advertisement
Table of Contents
