Related Manuals for Thunderstone EZ Flow XR
Summary of Contents for Thunderstone EZ Flow XR
- Page 1 OPERATION AND REMOTE PROGRAMMING Easy Flow Operation & Remote Programming Instructions Thunderstone Manufacturing, LLC. 3400 West O Street Lincoln, NE 68528 402-435-4249 (Fax) 402-438-3918 www.thunderstonemfg.com Revision A July 26 2018...
- Page 2 Keypad Controller Operation - Manual Operation Power on the keypad controller by holding the Control Box Light OPEN Button “FRONT” “OPEN” and “CLOSE” buttons on the keypad simultaneously for 5 seconds or until the blue light comes on to indicate the system is activated.
- Page 3 Keypad Controller Operation - Wireless Operation Remote functions also listed on decal under lid of remote. 1. To power ON the EZ Flow system using the remote. a. Open the remote lid and press the “Mode” button two times then wait two seconds for remote to toggle to the “Front Hopper”...
- Page 4 EZ Flow Cylinder Disconnect *Emergency Operation*(if equipped) 1. Locate poppet valve buttons. (Fig A) Top Button (1) is for front door. Figure A Bottom Button (2) is for rear door. Poppet Valves 2. Push & hold each button individually for approx. 15 secs or until system is depressurized.
Need help?
Do you have a question about the EZ Flow XR and is the answer not in the manual?
Questions and answers