Specifications - NEC LCD1504M User Manual

Specifications

Monitor
Specifications
LCD Module
Viewable Image Size:
Native Resolution (Pixel Count):
Input Signal
Analog input:
Display Colors
Left/right:
Maximum
Up/Down:
Viewing Angles
Horizontal:
Synchronization
Range
Resolutions Supported
Horizontal :
Active Display Area
Power Supply
Current Rating
Dimensions
Weight
Environmental Considerations
Operating Temperature:
Humidity:
Storage Temperature:
Humidity:
* 1 Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different. This is
normal and necessary for all current flat panel technologies when displaying nonnative resolutions full screen. In flat panel technologies, each
dot on the screen is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution must be done.
NOTE: Technical specifications are subject to change without notice.
–continued
１５０４Ｍ
LCD
Monitor
Diagonal: 15.0 inch
15.0 inch
1024 x 768
Video: ANALOG 0.7 Vp-p/75 Ohms
Sync: Separate sync TTL Level (Positive/Negative)
Horizontal sync Positive/Negative
Vertical sync Positive/Negative
16,194,277
60°/60° (CR>10)
45°/45° (CR>10)
31.5 kHz to 61 kHz
Vertical: 55 Hz to 76 Hz
720 x 400* 1 :VGA text
640 x 480* at 60 Hz to 75 Hz
1
800 x 600* 1 at 56 Hz to 75 Hz
832 x 624* at 75 Hz
1
1024 x 768 at 60 Hz to 75 Hz ..................
304.1 mm/12.0 inches
Vertical : 228.1 mm/9.0 inches
100 ~50/60 Hz
-240 V
0.5 - 0.3 A/100-240V
344.6 mm (W) x 352.7 mm (H) x 165 mm (D)
13.6 inches (W) x 13.9 inches (H) x 6.5 inches (D)
3.2 kg
7.1 lbs
5°C to 35°C/41°F to 95°F
10% to 80%
Feet: 0 to 10,000 Feet
-10°C to 60°C/14°F to 140°F
10% to 85%
Feet: 0 to 40,000 Feet
30
Notes
Active matrix; thin film transistor (TFT)
liquid crystal display (LCD); 0.297 mm dot
pitch.
Depending on display card used.
Automatically
Automatically
Some systems may not support
all modes listed.
NEC DISPLAY SOL UTIONS
recommended resolution at 75 Hz for
optimal display performance.