Related Manuals for Martem TELEM-AGC
Summary of Contents for Martem TELEM-AGC
- Page 1 KAUGJUHTIMISSÜSTEEMID TELECONTROL SYSTEMS Data Concentrator TELEM-AGC User Manual Martem AS 2018...
-
Page 2: Table Of Contents
Contents 1. INTRODUCTION ..........................3 2. FEATURES ............................4 3. TECHNICAL DATA ..........................5 4. TERMINAL CONNECTORS ....................... 7 5. COMMUNICATION CABLES ......................8 6. FIRMWARE UPDATE ......................... 9 7. DIP SWITCHES ..........................10 8. INDICATION LED-S .......................... 10 9. CONFIGURATION TOOL ......................... 10 10. -
Page 3: Introduction
Data Concentrator TELEM-AGC User Manual Rev. 1 / 2018 1. Introduction TELEM-AGC is designed for use in electrical networks as an communication concentrator and as a 4G modem. Main applications of TELEM-AGC are: To operate as 4G modem with or without Data Concentrator software with... -
Page 4: Features
Configurable remotely over communication line Configuration export to ASCII, CSV format files TELEM RTU devices can be remotely configured via TELEM-AGC Logical operations between digital and analog signals Data sending with time and quality stamp ... -
Page 5: Technical Data
AS Martem Data Concentrator TELEM-AGC User Manual Rev. 1 / 2018 3. Technical Data Data communication protocols To higher level systems: IEC 60870-5-104 IEC 60870-5-101 unbalanced and balanced, To lower level devices: IEC 60870-5-104, IEC 60870-5-103, ... - Page 6 AS Martem Data Concentrator TELEM-AGC User Manual Rev. 1 / 2018 Module E (2 IO cards) 16 optically isolated dry contact digital inputs (connected to dry contacts) 6 double digital outputs (relay contacts max. 0.3A 110VDC, 2A 30VDC, 0.5A 125VAC)
-
Page 7: Terminal Connectors
AS Martem Data Concentrator TELEM-AGC User Manual Rev. 1 / 2018 4. Terminal Connectors RJ9-4P4C SIM 2 SIM 1 1-WIRE UPSIDE GPRS Antenna OPTIONAL INTERFACES Telem-AGC See order codes MAIN BOARD, FRONT PANEL DO 4 DO 1 Modem Console Alert... -
Page 8: Communication Cables
AS Martem Data Concentrator TELEM-AGC User Manual Rev. 1 / 2018 5. Communication cables AS MARTEM Tel: +372 639 7979 martem@martem.eu www.martem.eu... -
Page 9: Firmware Update
(provided by Martem AS) choose Update From File If you do not have .7z firmware update file choose Check martem.ee to refresh exsisting firmware versions list for this AGC-L device Press Update to feature and choose needed firmware version. Download is starting... -
Page 10: Dip Switches
ALERT – red LED – failure Green LED-s for serial communication ports for RX, TX indication. 9. Configuration tool The Telem-AGC device is configured with Telem-GWS software. The configuration process is described in Telem-GWS software manua AS MARTEM Tel: +372 639 7979 martem@martem.eu... -
Page 11: Order Code
AS Martem Data Concentrator TELEM-AGC User Manual Rev. 1 / 2018 10. Order code TELEM-AGC-XX-XX-X(X) Licence B - Basic modem & router C - Data concentrator Power L - 11...33 V DC H - 20...60 V DC Extra communication S – FO SC serial G –... -
Page 12: Open-Source Software Information
Rev. 1 / 2018 11. Open-source software information This device produced by Martem Ltd. includes open-source components. The most up to date info of exact software used by Martem’s build system and licensing info of used software can be found from http://phobos.martem.ee/shr/br-sources/...
Need help?
Do you have a question about the TELEM-AGC and is the answer not in the manual?
Questions and answers