Technical Data; Operation - Habegger HIT 6 Operating Manual

3

Technical data

Rope pulling machine
Nominal pulling force *
Overload protection *
Nominal rope diameter
Nominal rope breaking load *
Weight of rope
(without hook)
Advance of rope
per double stroke
Hand lever force
under nominal load
Telescope lever, extractable
Length min.
max.
Inherent weight without rope
Inherent weight without rope 10 special
Dimensions:
Width
Length
Height
Spare shear pins
Rope for:
Rope Ø
Minimum rope diameter under nominal
load
Permissible rope force *
Rope breaking load *
Calculated rope safety
*
1 kN corresponds approximately to 100 kg
4

Operation

Only persons with appropriate qualifications,
who have been trained in the operation of the
machine and are familiar with it, and who also
know the relevant accident prevention
regulations as well as the operating manual may
be authorized to operate the machine on their
own.
HIT 6 HIT 10
HIT
10special
6 kN 10 kN
9 kN 15 kN
6.4 mm 8.4 mm
30 kN 50 kN
0.16 kg/m 0.25 kg/m
30 mm 55 mm
250 N 300 N
no no
450 mm 655 mm
4.2 kg 6.5 kg
7,1 kg
100 mm 100 mm
352 mm 430 mm
210 mm 242 mm
in the jaw-opening lever
HIT 6 HIT 10
6.4 mm 8.4 mm
5.8 mm 7.6 mm
6 kN 10 kN
30 kN 50 kN
> 5 > 5
HIT 16 HIT 32
16 kN 32 kN
24 kN 48 kN
11.2 mm 16.2 mm
80 kN 160 kN
0.41 kg/m 0.90 kg/m
60 mm 30 mm
350 N 500 N
yes yes
670 mm 670 mm
1080 mm 1080 mm
12 kg 21.5 kg
120 mm 150 mm
550 mm 685 mm
300 mm 330 mm
in the carrying grip
HIT 16 HIT 32
11.2 mm 16.2 mm
10.1 mm 14.6 mm
16 kN 32 kN
80 kN 160 kN
> 5 > 5
23