Bolens BL100, BL150 Operator's Manual page 5

This operator's manual describes safety and international symbols and pictographs that
may appear on this product. Read the operator's manual for complete safety, assembly,
operating and maintenance and repair information.
SYMBOL MEANING
• SAFETY ALERT SYMBOL
Indicates danger, warning
or caution. May be used in
conjunction with other
symbols or pictographs.
• WARNING - READ
OPERATOR'S MANUAL
Read the operator's manual(s)
and follow all warnings and
safety instructions. Failure to
do so can result in serious
injury to the operator and/or
bystanders.
• WEAR EYE AND HEARING
PROTECTION
WARNING:
objects and loud noise can
cause severe eye injury and
hearing loss. Wear eye
protection meeting ANSI
Z87.1-1989 standards and
ear protection when
operating this unit. Use a full
face shield when needed.
• UNLEADED FUEL
Always use clean, fresh
unleaded fuel
• ON/OFF STOP CONTROL
ON / START / RUN
• ON/OFF STOP CONTROL
OFF or STOP
RULES FOR SAFE OPERATION
Thrown
SYMBOL MEANING
• THROWN OBJECTS AND
ROTATING CUTTER CAN
CAUSE SEVERE INJURY
WARNING:
can be propelled at high
speed, causing injury. Keep
away from the rotating rotor.
• KEEP BYSTANDERS AWAY
WARNING:
bystanders, especially
children and pets, at least
50 feet (15 m.) from the
operating area.
• HOT SURFACE WARNING
Do not touch a hot muffler or
cylinder. You may get
burned. These parts get
extremely hot from operation.
When turned off they remain
hot for a short time.
• OIL
Refer to operator's manual
for the proper type of oil.
• CHOKE CONTROL
1. • FULL choke position
2. • PARTIAL choke position
3. • RUN choke position
Small objects
Keep all
5