Advertisement
Step 6:
•
Before placing caster in the bottom of the frame leg,
lock the caster by pushing down on the brake lever.
•
Twist the stem of the caster into the hole on the
bottom of the leg frame.
•
Use 3/4" wrench to tighten 3/4" nut on stem of caster.
•
Repeat for remaining casters.
Step 7:
•
Turn table to the upright position with the help of
another person.
Step 8:
•
Align pre-drilled holes in one of the long laminate rails
with the threaded inserts in the side of the top.
•
Using a 1/4"-20x40mm joint connector bolt, insert the
bolt through the pre-drilled hole in the rail into the
threaded insert of the top. Use a 4mm Allen wrench
or a 4mm hex bit and a screw gun to fasten bolt into
place.
•
After the first bolt is fastened, proceed attaching the
remaining bolts in the long rail.
•
Repeat
Step 8
for the remaining three rails.
wibenchmfg.com
Specifications are subject to change. Product
images are for illustrative purposes only and may
differ from the actual product.
Assembly Instructions
Ingenuity EPIC Table
Step 7
507 E. Grant St. Thorp, WI 54771 • P - 800.242.2303
Step 6
Step 8
2
Advertisement
