Table of Contents
Advertisement
4. Replace the lamp with new one and fix it using the same two
screws.
• Firmly tighten the lamp screws. Loose screws may cause bad
connection of the connector which in turn may result in
malfunctioning.
5. Install the lamp cover and fix it using screws.
•
To prevent burn, install the lamp cover and secure it using
the screws.
•
Do not turn on the power with lamp cover removed.
• Whenever the lamp is replaced, reset the total operation time
of the lamp. Do not reset if the lamp has not been replaced.
• Do not perform resetting without changing the lamp, as this
can cause lamp breakage.
Lamp cover
– 24 –
Screw
Lamp
Screw
Advertisement
Table of Contents
