Table of Contents
Advertisement
Quick Links
Mulch 'N Catch
Convertible Rotary Lawnmower
Mower Models - 35m, 75m
WARNING
Before changing any
component or adjustments
(where applicable):
• Release the operator
presence control.
• Disconnect the spark plug
wire from the spark plug.
• Blades and moving parts
must be stopped.
50m, 51m, 60m, 61m
80m
TM
TM
Advertisement
Table of Contents
Related Manuals for MTD Mulch 'N Catch 35M
Summary of Contents for MTD Mulch 'N Catch 35M
- Page 1 Mulch 'N Catch Convertible Rotary Lawnmower Mower Models - 35m, 75m WARNING Before changing any component or adjustments (where applicable): • Release the operator presence control. • Disconnect the spark plug wire from the spark plug. • Blades and moving parts must be stopped.
-
Page 2: Table Of Contents
1.2 Benefits for your lawn 1.3 Benefits for you SETTING UP 2.1 Multipurpose 2.2 Installing the Mulch Plug for models 35m and 75m 2.3 Installing the Mulch Plug for models 50m, 51m, 60m, 61m & 80m 2.4 Removing the Mulch Plug for models 35m, and 75m 2.5 Removing the Mulch Plug... -
Page 3: Introduction
(Refer Owner’s Manual), and adjust the conbar to suit (Refer 2.8). 2.2 Installing the Mulch Plug for Models 35m and 75m ( Figure 1 ): 1. Stop the engine. 2. Lift the rear flap of the mower. 3. Remove the grass catcher or deflector (if fitted). -
Page 4: Installing The Mulch Plug For Models 50M, 51M, 60M, 61M & 80M
Figure 2 - Installing the Mulch Plug - 50m, 51m, 60m, 61m, & 80m 2.4 Removing the Mulch Plug for Models 35m and 75m ( Figure 1 ): 1. Stop the engine. 2. Lift the rear flap. 3. Grasp the handle and, with a firm jolt, lift the mulch plug up and away from the mower. -
Page 5: Maintenance
5. Check the disc retaining bolts. Tighten the centre bolt to 65-70 Nm and the three concentric bolts to 8-11 Nm. For Models 35m, 75m, 16-19 Nm. For Models 50m, 51m, 60m, 61m and 80m 3.4 Blade Change 1. Disconnect the spark plug wire. -
Page 6: Figure 6 - Grass Height
Rover Mowers Limited • Run the engine at full throttle. Running the engine at low speed does not allow the blades to mulch the grass efficiently. Figure 6 - Grass Height • Keep the mulch blades sharp. The mulch blades are designed to cut and re-cut the blades of grass. - Page 7 Rover Mowers Limited NOTES...
-
Page 8: Warranty Conditions
Product Serial No:... Date of Purchase:... MTD Products Pty Ltd reserves the right to make changes and add improvements to its product at any time without notice or obligation. The Company also reserves the right to discontinue manufacture of any product at its discretion at any time PO Box 376, Dandenong, Victoria 3175 Australia commitment to Greening Australia and New Zealand.
Need help?
Do you have a question about the Mulch 'N Catch 35M and is the answer not in the manual?
Questions and answers