Table of Contents
Advertisement
battery charging
New batteries are not fully charged.
charge using the charger
1 Pull out the
connector cover, and
insert the charger
into mini USB
connector on your
phone as shown.
2 Plug the other end
of the charger into
the appropriate
electrical outlet.
When you charge the
battery, the battery level indicator at the upper
right of the screen shows charging progress.
At least one segment of the indicator must be
visible to ensure full phone functionality while
charging.
charge from your computer
You can partially charge your phone's
battery by connecting a Motorola-approved
USB cable from your phone's mini-USB port
to a high power USB connector on a
computer (not a low-power one, such as the
USB connector on your keyboard or bus-
powered USB hub). Typically, USB high-power
connectors are located directly on your
computer.
Note: The phone will be charged at a slower
rate than it is charged with the rapid charger.
Your computer must be turned on, and you
must have correct software drivers installed
on your computer. If the Phone is off when
the USB cable is connected between the
computer and the phone, the phone will
power up in charging mode. This mode allows
the phone to charge fastest and quickest.
Note: If the battery is very low, the phone will
not turn On, but will continue to charge at a
essentials
17
Advertisement
Table of Contents
