Advanced Base Settings; Set The Dial Mode; Set The Flash Time - Motorola S805 User Manual

P ,
3. Press and to select
P
Yes
4. Select and press
procedure as below:
1. Place the unregistered cordless handset on the
charger.
v
2. Press and hold for 4 seconds on base.
v
3. Release once IN USE LED is flashing.
4. A confirmation tone is generated if registration is
Handset X
successful.
number of handsets and the phone goes back to idle.
28
Yes No
or .
to enter the registration
X
is displayed where denotes the

7. Advanced Base Settings

7.1

Set the Dial Mode

The default dialing mode is suitable for your country and
network operator. It is unlikely that you should need to
change this setting unless advised to do so.
P ,
1. Press and to select
P
Dial Mode
2. Press to select
P ,
3. Press and to select
P
4. Press to save.
NOTE
If pulse mode is selected, press
tone dialing temporarily when dialing out. After the call is
ended, the dial mode will change back to pulse.
7.2

Set the Flash Time

The default flash time is 600ms. It is unlikely that you should
need to change this setting unless advised to do so.
P ,
1. Press and to select
P ,
2. Press and to select
Setup Base
.
.
Tone Pulse
or .
*
to switch from pulse to
Setup Base
.
Flash Time
.
Advanced Base Settings