3.1.7
Answer a call
1. When the phone rings and flashes in the display, press
<
J
or press
to answer the call via the loudspeaker.
WARNING
When the phone is ringing, avoid holding the earpiece too
close to your ear as it may damage your hearing. Handsfree
activation can suddenly increase the volume in the earpiece
to a very high level. Make sure the handset is not too close
to your ear.
TIPS
If Auto Talk mode is on, simply lift up the handset from its
base to answer the call. The default setting is Off.
NOTE
An incoming call has priority over other events. Whenever
there is an incoming call, other operations in progress such
as phone settings, menu navigation, etc. will be ended.
3.1.8
Adjust volume
,
1. During a call, press
loudspeaker volume.
-
The level is shown in the handset display.
18
to adjust the earpiece or
3.1.9
Mute
Mute the microphone so that you can talk to someone else
in the room without your caller hearing you.
M
1. During a call, press
- The microphone is muted.
M
2. Press
again to turn the microphone back on.
3.1.10 End a call
>
1. During a call, press
After you hang up, the duration of your call will display for
around 2 seconds.
3.2
Intercom
This feature is only available when there are at least 2
registered handsets. It allows you to make internal calls,
transfer external calls from one handset to another and use
the conference option.
3.2.1
Call another handset
I
1. Press
.
,
2. Press
to the handset you want to call.
P
3. Press
to call the handset.
>
4. Press
to hang up.
.
or put the handset on the cradle.
Using the phone