Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Yeastar Technology UF51 5G CPE
Summary of Contents for Yeastar Technology UF51 5G CPE
- Page 1 5G CPE UF51 Installation Guide...
- Page 2 Do not connect or power the equipment using cables that have been damaged. Related Documents This Installation Guide only explains the installation of Yeastar UF51 5G CPE. For more functionality and advanced settings, please refer to the relevant documents as below. Document...
-
Page 3: Table Of Contents
Contents Packing List ................................ 4 Overview ..............................5 Dimensions (mm) ............................5 Serial & IO & Power Pinouts ........................6 LED Indicators ............................6 Reset Button ............................... 7 Power Supply ..............................8 Hardware Installation ............................9 SIM Card Installation ..........................9 Waterproof Cover &... -
Page 4: Packing List
Packing List Before you begin to install the UF51 5G CPE, please check the package contents to verify that you have received the items below. 1 × UF51 Device 1 × PoE Injector 1 × Mounting Bracket 1 × Ethernet Cable 4 ×... -
Page 5: Overview
Hardware Introduction Overview LED Indicator Area STATUS: Power & System Indicator 5G: Cellular Indicator Waterproof Connector SIM Slot Reset Button Vent Plug LAN2 Port Bracket Mounting Screws Serial & IO & Power Interface LAN1/WAN Port (PoE PD) Dimensions (mm) -
Page 6: Serial & Io & Power Pinouts
Serial & IO & Power Pinouts RS232 Power Description /RS485 Digital Input Ground Negative Positive (9-48V) Common Ground Digital Output RS232-RXD RXD/B RS485-B RS232-TXD TXD/A RS485-A LED Indicators Indication Status Description The power is switched off Power & Orange Static: The system is startup STATUS System Green... -
Page 7: Reset Button
Reset Button Description Function STATUS & 5G LED Action Static Press and hold the reset button for more than 5 seconds. Reset Static → Blinking Release the button and wait. Off → Static Green The device resets to factory default. -
Page 8: Power Supply
Power Supply UF51 can be powered by 802.3af standard PoE or 9-48VDC. Both power supplies can’t be used at the same time. PoE Supply: Follow the below picture to provide power supply via PoE injector. Besides, UF51 can also be powered by PoE switch. DC Supply: Connect the DC power cable to terminal block, then connect the terminal block to DC interface to power the device. -
Page 9: Hardware Installation
Hardware Installation SIM Card Installation Insert the SIM card into the device according to the direction icon on the device. If you need to take out the SIM card, press into the SIM card and it will pop out automatically. Waterproof Cover &... -
Page 10: Device Installation
Note: Bottom cover can be fixed with the device via the wiring behind the cover. Device Installation UF51 supports multiple installation methods like desktop, wall mounting, pole mounting, etc. Before you start, make sure that your SIM card has been inserted and all cables have been installed. Note: Do not connect device to power supply or other devices when installing. -
Page 11: Pole Mounting
Note: The connecting lines of adjacent points are at right angles. Drill four holes with a depth of 32 mm by using your drill with a 6 mm drill bit on the positions you marked previously on the wall. Insert four wall plugs into the holes respectively. Mount the mounting bracket horizontally to the wall by fixing the wall mounting screws into the wall plugs. -
Page 13: Login The Web Gui
Login the Web GUI UF51 provides web-based configuration interface for management. If this is the first time you configure the device, please use the default settings below: Username: admin Password: password Wireless Access A. Enable Wireless Network Connection on your computer and search for access point “Router_******” to connect it. - Page 14 C. Open a Web browser on your PC (Chrome is recommended) and type in the IP address 192.168.1.1 to access the web GUI. D. Enter the username and password, click “Login”. If you enter the username or password incorrectly more than 5 times, the login page will be locked for 10 minutes.