Mitsubishi Mr.Slim MSZ-A09NA Operating Instructions Manual page 16

I
To change the horizontal direction of the air flow, move the vertical vane manually.
Adjust the vane before operation starts.
Since the horizontal vane moves automatically, your fingers may be caught.
To change the air flow direction not to blow directly onto your body.
To change the air
flow direction
Pressing and hold- Use this function if you don't
VANE
want the air from the indoor
ing the button
unit to blow directly onto your
for 2 seconds or
body.
more causes the
horizontal vane to
reverse and move
to horizontal posi-
tion.
Horizontal
position
NOTE:
• If you make the air flow not to blow directly onto your body by pressing
minutes even during the operation of the air conditioner.
• The air conditioner operates with decreased air flow until the compressor turns on again.
When to use this function?
• Depending on the shape
of the room, the air may
blow directly onto your
body.
VANE
• Press the button
again to return the vane to
the previously-set position.
COOL/DRY
The air conditioner starts the
cooling or drying operation
approx. 3 minutes after the
vane has moved to the hori-
zontal position.
VANE
• When the button is
pressed again, the vane
returns to the previously-
set position and the air
conditioner starts the cool-
ing or drying operation in
approx. 3 minutes.
VANE
HEAT
The air conditioner starts heat-
ing operation approx. 3 min-
utes after the vane has moved
to the horizontal position.
• Sometimes the
around your feet may not
warm. To warn the area
around the feet, set the
horizontal vane to
(AUTO) or the downward-
blowing position.
VANE
• When the
pressed again, the vane re-
turns to the previously-set
position and the air condi-
tioner starts heating opera-
tion in approx. 3 minutes.
button, the compressor stops for 3
area
button is