Casio FC-100V User Manual page 111

A STAT Editor Screen
There are two STAT editor screen formats, depending on
the type of statistical calculation you selected.
STAT
Single-variable Statistics
• The first line of the STAT editor screen shows the value
for the first sample or for the values for their first pair of
samples.
A FREQ (Frequency) Column
If you turn on the Statistical Display item on the calculator's
setup screen, a column labeled "FREQ" will also be
included on the STAT editor screen.
You can use the FREQ column to specify the frequency
(the number of times the same sample appears in the group
of data) of each sample value.
A Rules for Inputting Sample Data on the
STAT Editor Screen
• Data you input is inserted into the cell where the cursor
is located. Use fcde to move the cursor between
cells.
• The values and expressions you can input on the STAT
editor screen are the same as those you can input in the
COMP Mode. Note, however, that the following functions
are not available on the STAT editor screen: multiple
operations in calculation history memory, multi-statement
input, and assignment to financial calculation variables.
• Pressing A while inputting data clears your current input.
• After inputting a value, press E. This registers the value
and displays up to six of its digits in the currently selected
cell.
STAT
Cursor
E-109
STAT
Paired-variable Statistics