Advertisement
Setting the Low-Pass Frequency
This in-dash EQ has a built-in low-pass crossover located on the front of the
unit. Set the crossover (60Hz - 90Hz) upon the type and size of your subwoofer
system.
1. Plug the additional video source into the DVD input located on the back
of the unit.
2. With the Main/DVD switch in the MAIN position, turn the equalizer volume to
a normal listening volume.
3. With the video source in play mode, switch to the DVD input source.
4. With the Main/DVD switch in the DVD position, adjust the input gain controls
located on the top of the panel so that the volume of the DVD source matches
the volume of the Main source.
WARNING
Investigate the layout of your automobile thoroughly before drilling or cutting
nay holes,' Take care when you work near the gas tanks, gas lines, hydraulic lines,
and electrical wiring. Attach the system securely to the automobile to prevent
damage, particularly in the event of an accident. Do not mount the system so
that the wire connections are unprotected or are subject to pinching or damage
from nearby objects.
The + 12VDC power wire must be fused at the battery positive terminal
connection. Before making or breaking power connections at the system power
terminals, disconnect the + 12V wire at the battery end. Con rm your radio/head
unit and/or other equipment is turned o while connecting the input jacks and
speaker terminals.
|f you need to replace the power fuse, replace it only with a fuse identical to that
supplied with the system. Using a fuse of di erent type or rating may result in
damage to this system which is not covered by the warranty.
www.Lanzar.com
7
Advertisement
