Lanzar VBE420P User Manual

4 band parametric equalizer

VBE420P

4 Band Parametric Equalizer

with Subwoofer Gain Control

Table of Contents

Need help?

Do you have a question about the VBE420P and is the answer not in the manual?

Page 1 VBE420P 4 Band Parametric Equalizer with Subwoofer Gain Control...
Page 2 We recommend that you adjust the volume of your source unit (radio/cassette, radio/CD player, etc.) at one half to three quarters up and leave it. We further recommend that you use the VBE420P volume control as the master (main) volume control because its performance is more linear than that of source units.
Page 3 Turn the knob clockwise to increase the input level or turn counterclockwise to reduce the input level. Phase Shift Selector Switch Allows you to select the proper phase of the subwoofer output signal to compensate for the timing di erences between the subwoofer output and the front/rear output signals. www.Lanzar.com...
Page 4 ELECTRICAL INSTALLATION CD CHANGER RADIO/CASSETTE www.Lanzar.com...
Page 5 Output Voltage: 7V RMS @ 0.05% THD • Voltage: 11V-15V • S/N Ratio: 110dB • Separation: > 60dB • Frequency Response: 10 Hz~ 50 KHz • Subwoofer Frequency: 30 Hz~ 250 Hz • Product Dimensions: 7'' x 4.1''x 1.10'' -inches www.Lanzar.com...
Page 6 Questions? Issues? We are here to help! Phone: (1) 718-535-1800 Email: support@lanzar.com...