Tarmo TAR011 Instruction Manual page 35

c. Attach the long arm to the swivel bracket assembly by using axis pin (86) and washer
∅40 (113), and lock with cotter pin (84).
d. Put the arm to the backhoe frame by using long pin ∅30x170 (85) and flat washer ∅24
(114), and lock with cotter pin ∅4x50 (55).
Note: Pin (85) is a safety pin for transportation. Remove it before using the ma-
chine, and insert it before towing the machine.
STEP 3: Assemble the swivel cylinder
a. Attach the cylinder (59) to the swivel cylinder base by using pin ∅30x124 (54) and flat
washer ∅24 (114), and lock with cotter pin ∅4x50 (55).
b. Connect the cylinder (59) to the swivel bracket assembly by using short pin ∅30x97 (63)
and flat washer ∅24 (114), and lock with cotter pin ∅4x50 (55).
35