Page 1
Before assembling your headboard, please read through these instructions carefully and familiarize yourself with the different parts. ASSEMBLE ATTENTION! If you receive a damaged or defective item, please contact Atlantic Furniture at customerservice@atlanticfurniture.com or 1-800-955-3726 Instructions apply for bed sizes PARTS LIST HARDWARE...
Page 2
ATTACHING HEADBOARD TO METAL BED FRAME Before assembling your bed, please read through these instructions carefully and familiarize yourself with the different parts. Instructions apply for bed sizes Metal bed frames are sold separately from wood headboards. The hardware shown on this page Adult assembly is supplied with your Atlantic wood headboard for attaching the bed frame to the headboard.
Page 3
Before assembling your bed frame, please read through these ASSEMBLE instructions carefully and familiarize yourself with the different parts. ATTENTION! If you receive a damaged or defective item, please contact Atlantic Furniture at customerservice@atlanticfurniture.com or 1-800-955-3726 PARTS LIST HARDWARE FOOT RAIL 1 PC JCB M6 X 25mm(1") - 6pcs...
Page 4
OPEN BED FRAME READY Step 3 Step 4 ASSEMBLE Attach open bed frame to the headboard Attach support legs (8) to slat support 1 & 2 (6)(7) as as shown below using 4 JCB M8 X 15mm bolts shown below. Using allen screw (G) tighten with that are supplied with your headboard.
Page 5
Before assembling your Trundle bed, please read through these instructions carefully. Familiarize yourself with the different parts. Adult assembly ATTENTION! If you receive a damaged or defective item, please contact Atlantic Furniture at customerservice@atlanticfurniture.com or 1-800-955-3726 Phillips screwdriver Customer supplied HARDWARE NOTE: WE INCLUDE SPARE HARDWARE IN CASE DAMAGE OCCURS DURING ASSEMBLY.
TRUNDLE BED PARTS LIST HARDWARE 1 BOX LEFT, RIGHT, MID RAIL 3 PCS FRONT PANEL 1 PC REAR BLOCK 2 PCS 2 SETS FRONT RAIL 1 PC SLAT KIT WITH WEBBING BACK RAIL 1 PC Step 1 Attach the left, right and mid rails (05) to the front rail (03) using L bracket (E) and JCB M6 X 1 5/8”(B).
Page 7
TRUNDLE BED Attach the front panel (02) to the front rail (03) as shown, using JCB M6 X 5/8” (C). Step 2 Tighten with the Allen wrench (G). Adult assembly JCB M6 X 5/8” Allen wrench Step 3 Lay the slat kits (07) webbing side down onto the rail assembly as shown. Attach using wood screw (F) and tighten with the Phillips head screw driver.
Page 8
TRUNDLE BED Step 4 Attach the rear blocks (06) to the back rail (04) as shown using JCB M6 X 2 3/8”(A) barrel nut (D). Tighten with the Allen wrench (G) JCB M6 X 2 3/8” Adult assembly Barrel nut Allen wrench Step 5 Lastly, Insert Trundle bed to the bed as shown below.