Advertisement
Quick Reference Guide
Also refer to the "Dishwasher Loading Instructions" which contain detailed information and useful tips.
DISHWASHER USER INSTRUCTIONS
Open the dishwasher door and turn
on the water tap.
1. Before selecting a programme, make
sure that the On/Off push button is in
the On position (both the end-of-cycle
and the On indicators are on).
2. Select the desired programme by
pressing the corresponding button.
3. Press the Start button and keep it
down for a few seconds after the end-
of-cycle indicator has switched off.
Then close the door to start the
programme.
4. To change the current programme,
open the door, press the Pre-rinse
button and close the door again.
Open the door again; wait for the
acoustic signal and make sure the
end-of-cycle indicator is on; press
the button corresponding to the new
programme; press the Start button
and close the door again to start the
dishwasher.
Note: If you open the door during
the wash cycle, you must wait at
least 1 min. with the door ajar before
starting the dishwasher again.
If the dishwasher is stopped during the
wash cycle, when started again it
resumes the wash cycle from where it
was interrupted.
5. To switch the dishwasher off, open the
door and press the On/Off button (the
indicator switches off).
Unload first the lower rack and then
the upper one.
Upper rack
Height adjustment must only be
carried out with the basket empty:
•
Release the caps of the rack rails.
•
Remove the basket and replace it as
required, using the pair of top or
bottom wheels.
•
Close the caps.
Crockery Holders:
•
Lowered: two layers of cups.
•
Raised: long-stemmed glasses.
Lower rack
Plate Holder:
•
Lowered: pots and pans.
•
Raised: plates.
Cutlery Basket:
•
Removable to gain space.
GB
Advertisement
