Advertisement
Quick Links
AIRCRAFT LED INDICATORS
The aircraft LED indicators are located under each motor and at the rear of the aircraft. The LED indicates the current state
of the aircraft. See diagrams below for indications.
(Front: Red, Rear :
READY
ALTITUDE MODE
(Front: Red, Rear: Yellow)
You can customize the front LED lights in different flight modes under the following path: DRONE SETTINGS >
AIRCRAFT > LED LIGHTS
14
INITIALIZING / WAITING FOR RC SIGNAL
Red
/
Green
/
Yellow
TO FLY
(ALTITUDE / POSITION / SPORT MODE)
POSITION MODE
(Front: Red, Rear: Blue)
alternating fast blinking LED)
(Front: Red, Rear: Purple)
SPORT MODE
Advertisement
Related Manuals for XDynamics Evolve 2
Summary of Contents for XDynamics Evolve 2
- Page 1 AIRCRAFT LED INDICATORS The aircraft LED indicators are located under each motor and at the rear of the aircraft. The LED indicates the current state of the aircraft. See diagrams below for indications. INITIALIZING / WAITING FOR RC SIGNAL (Front: Red, Rear : Green Yellow alternating fast blinking LED)
- Page 2 ERROR/MALFUNCTION (Front: Red, Rear : Red - fast blinking 3 times) (Front: Red, Rear : Red - fast blinking continuously) When encountered in midflight, please land the aircraft immediately. Contact XDynamics Supports. EVOLVE 2 User Manual V1.2 by XDynamics Limited...
- Page 3 ENSURE CORRECT PROPELLER ALIGNMENT The propellers need to be mounted with the correct CW (clockwise) and CCW (counter-clockwise) configurations. Two propellers are marked with white rings and two propellers have no markings. Mount the propellers with the white rings to the motors with a white ring on top.
- Page 4 ATTACHING AND DETACHING THE PROPELLERS The EVOLVE 2 aircraft employs a sturdily constructed attach and detach propeller system. With a quick half turn installation, the aircraft can be ready to fly within minutes of pulling it out of the pack. To detach the propellers, follow the steps below in reverse.