Registering premiums and discounts
This section describes how to prepare and register premiums and discounts.
Programming premiums and discounts
P
You can use the
key to register either discounts (percentage decreases) or premiums (percentage increases).
The following procedures let you select the operation you want for the P key. They also let you program the tax
calculation method, the tax rounding method, and a preset rate.
To program tax calculation, tax rounding and the function of the P key
OW
A-A08
Z
X
REG
OFF
RF
Mode Switch
Tax status for subtotals
This specification defines where the result
of the percent calculation on a subtotal
should be reflected (added to or subtracted
from) for tax purposes. Note that this speci-
fication is for calculations with subtotals
only, and is not applied for calculations
involving individual items.
2
Tax Table 1
2
Tax Table 2
2
Tax Table 1 and 2
2
No tax calculation
P
• Tax status for the
Use all three digits
s
Rounding method
This specification defines the method
used to round the result of a percentage
calculation.
Round off
Round up
⁄
Cut off
¤
‹
‚
key is initialized as tax table 1 and 2.
P
s
Key function specification
This specification defines the function of the
P
P
Use
‚
2
P
Use
⁄
2
¤
2
39
key.
as discount key (%–) 2
as premium key (%+) 2
‚
⁄