MSI MS- 9130 v1.x User Manual page 52

MS-9130 Workstation Mainboard
controller cards to connect audio connectors, set the field to Disabled.
Setting options: Disabled, Auto.
USB Controller
Select Enabled if your system contains a Universal Serial Bus (USB)
controller and you have USB peripherals. Settings: All Enabled, All
Disabled, 1&2 USB Port, 2&3 USB Port, 1&3 USB Port, 1 USB Port, 2
USB Port, 3 USB Port.
USB 2.0
Set to Enabled if you need to use any USB 2.0 device in the operating
system that does not support or have any USB 2.0 driver installed, such
as DOS and SCO Unix. Setting options: Disabled, Enabled.
USB Keyboard/Mouse Support
Set to Enabled if you need to use a USB keyboard/mouse in the operating
system that does not support or does not have any USB driver installed,
such as DOS and SCO Unix.
Onboard Broadcom NIC
This item enables or disables the initialization of the onboard Broadcome NIC
(network interface card). Setting options: Enabled, Disabled.
Onboard Lan Boot ROM
This item enables or disables the initialization of the onboard LAN Boot ROMs
during bootup. Selecting Disabled will speed up the boot process.
SuperIO Device
Press <Enter> and the following sub-menu appears:
Onboard FDC Controller
Select Enabled if your system has a floppy disk controller (FDD) installed
on the system board and you wish to use it. If you install add-on FDC or
the system has no floppy drive, select Disabled in this field. Setting
options: Enabled, Disabled.
3-16