Table of Contents
Advertisement
Quick Links
This booklet will guide you through the steps you need to take to complete this project.
Please read the instructions carefully to ensure that the assembly is carried out correctly
and safely. To do so, please respect the following:
>
Make sure that all bolts and nuts are bolted properly.
>
Do not modify this dock system beyond the recommendations described in this manual.
The warranty will be void if altered or repaired.
>
Wear protection glasses, gloves and work boots when assembling the dock.
>
Keep children and pets away while assembling your dock.
>
The load capacity of this structure is limited to 4 persons or 800 lbs (363 kg).
ASSEMBLE - ENJOY - SHARE
Toll-free line : 1-800-585-1237
STATIONARY DOCK KIT
l
info@multinautic.com
ALUMINUM
QP-427D
(# 21114)
Assembly and
Installation
Guide
Advertisement
Table of Contents
Related Manuals for Multi Nautic QP-427D
Summary of Contents for Multi Nautic QP-427D
- Page 1 ALUMINUM STATIONARY DOCK KIT QP-427D This booklet will guide you through the steps you need to take to complete this project. (# 21114) Please read the instructions carefully to ensure that the assembly is carried out correctly and safely. To do so, please respect the following: >...
- Page 2 INSTALLATION TYPES The QP-427D 12 ft (3.66 m) model is an aluminum dock that meets the growing demand for a dock that allows for installation with lightweight plastic decking. You can therefore choose between polymer panels or wood decking. It is sturdy, modular, easy to assemble and light to handle.
- Page 3 STRUCTURE Multinautic QP-427 Before starting assembly, strongly recommend reading the instructions on page 5 as configuration adaptors may be combined with the structural parts. Place the parts to be assembled on the floor to visualize the steps to follow. Combine the aluminum parts following...
- Page 4 DECKING As indicated on page 2, different types of decking can complete this dock. Multinautic® offers pre-configured packages of cedar or polymer decking. Those Decking Kits have their own installation guide. If you prefer to install your own wood, here are the required elements for its construction and the steps to follow: >...
- Page 5 INSTALLATION JUNCTION PLATES AND LAYOUT ADAPTERS Plan the installation of your docks according to the possibilities shown in the diagrams beside. Whether end-to-end (A), "L" shaped (B) or parallel (C), there are many possible combinations. Note that: > the Junction Plates (A), for a straight line installation, will be combined with the Leg Holders with the stainless steel hexagonal bolts;...
- Page 6 Discover a whole range of accessories and ramps on Multinautic.com Suggestions of complementary products for your QP-427D™ Stationary Dock Choice of dock ladders Mooring Accessories > made of aluminum or steel > Aluminum & PVC 30 in. adjustable straight or angled Vertical Bumpers >...
Need help?
Do you have a question about the QP-427D and is the answer not in the manual?
Questions and answers