Power on Not on the LAN
On the LAN
Normal Operation *1
Automatic
Setting
Setup
Finished seting
Using
Getting IP address *2
DHCP
Got IP address
Updating Firmware
Pressing FACTORY DEFAULT
RESET button
UPnP Failure *3
In Privacy Mode
Internal Failure
*1) The indicator turns orange if the camera is not connected to the LAN.
*2) The indicator blinks orange if the camera is not connected to the LAN.
*3) When the sensor is active, the interval between blinks may increase.
6.2. BOTTOM VIEW
6.3. REAR VIEW
Orange Orange blinking
Orange Orange and green
blinking Green
Green
Green blinking
Green
Orange blinking Green blinking
Green
Orange blinking
Orange blinking Turning off
(The camera restarts about 1
minute later.)
Orange blinking (About a 2-second
interval)
Red
Red blinking
21