Nokia HH-12 Manual page 4

Ensure that the mounting device or
mobile holder is not installed where
you might come in contact with it in
the event of an accident or collision.
Periodically check that the suction cup
at the bottom of the mounting device
is firmly attached to the windscreen,
especially if the ambient temperature
changes a lot.
Attach to a windscreen
Locate a safe mounting surface on the
windscreen, and clean the surface
thoroughly with a glass cleaner and a
clean towel. If the ambient
temperature is below +15°C (60°F),
carefully warm the surface and the
suction cup with a hair dryer to ensure
a firm grip on the windscreen. Ensure
that you do not heat the windscreen
excessively to avoid damage to it.
Never leave the mounting device
inside the vehicle in direct sunlight or
in excessive heat. The mounting
device and suction cup may be
damaged and adhesion may be
impaired if the inside temperature
exceeds +70°C (160°F).
Press the suction cup at the bottom of
the mounting device firmly on the
windscreen (see step 1 at the start of
this guide), and carefully push the
locking lever inside the mounting
device (2) towards the suction cup to
create a vacuum between the suction
cup and the windscreen. Check that
the suction cup is firmly attached.
To detach the mounting device from
the windscreen, carefully push the
ENGLISH